Contact Us Now
Have Questions or concerns about your order? Call Us now at (833) 910 3416!
Order Today - Ships Tomorrow
Have Questions or concerns about your order? Call Us now at (833) 910 3416!
Online price only
Online price only
Couldn't load pickup availability
There are a few measurements that you need to be aware of regarding any trailer. To get the measurement, it's easiest if you remove your tires and wheels, or measure center of tire to center of tire. It can also be helpful to have a friend hold one side of the tape measure, but it’s not absolutely necessary.
Hub Face Measurement:
To obtain the hub face measurement, first hook your tape measure to the outside of the hub, (the part of the hub facing the wheel). Measure across the axle to the exact same spot on the opposite side. Be careful not to measure to the inside of the hub, only the outside. This is the primary measurement that is needed. The rest of the measurements below are alternative measurements that can be used to arrive at this measurement.
Spring Center Measurement:
This measurement is critical. If the springs are misplaced due to bad measurement, you can end up bending the axles. This one is difficult to do alone. Have a friend hold the end of the tape measure right in the middle of one of the springs, while you extend to the center of the opposite spring. If taking the measurements on your own, then you can cheat by first hooking the tape measure on the outside of one spring and then extending it to the inside of the opposite spring.
The axle position in relation to the spring needs to be considered before building. The options are "overslung". where the spring is mounted over the axle, or "underslung" where the spring is mounted under the axle.
There is no advantage to either system in regards to trailer strength or ride, but does affect the height of the chassis/tongue above the road and depending on the load can aid or hinder trailer stability.
Purchasing the correct hub or drum is an important step in repairing your trailer axle.
There is simple and easy to follow steps to make sure you are getting the correct hub.
Step 1: Remove your hub or drum from your trailer axle.
Step 2: Measure your bolt pattern to identify what capacity your axle is, if it is unknown. Please see the following diagram to determine your bolt pattern.
Step 3: Now, you can also remove the front and rear bearings and seal. Once you remove the bearings, you will be able to read the number off the back of the bearings that correspond with a correct spindle size. If this number is not readable, you will be able to measure the inside dimensions of the bearing and seal in order to determine which one you need. Please see the attached pictures on how to do so.
Step 4: Pick the best hub or drum for your needs. If you are unsure, we would be happy to assist you in making the correct decision.
Specs:
If you're building or repairing a trailer, TK axles are a great option. At The Trailer Parts Outlet, we're dedicated to providing our customers with the very best, and we're always happy to answer any questions you may have. Order your new 7K axle beam online today and get your trailer back on the road in less time!
Features:
To place a custom axle order, please call (936) 289-3191 and our trailer parts experts will be more than happy to assist you.
Fast shipping. Fit my trailer perfectly. Took about a hour to switch and I'm back in business
Excelente
prompt delivery , they installed perfectly
I bent a 7K Dexter axle on my dump trailer. After reading the information on the axle from “The Trailer Parts Outlet “ I decided to order the 7000 lb axle and am satisfied with the product as well as the customer service. The shipment was above and beyond, faster than expected. A representative called the day it shipped to let me know it was being shipped and to see if I might need anything else before sending it. I purchased a Beam Only and everything from my old bent Dexter axle fit perfectly. Thanks to “The Trailer Parts Outlet” I have my dump trailer back in working condition. I have already recommended them to a friend in need of a torsion axle.
James W.
Thank you for the Review!!!
This axle beam came in a timely manner and it was a perfect fit.
Fast shipping. Fit my trailer perfectly. Took about a hour to switch and I'm back in business
Excelente
prompt delivery , they installed perfectly
I bent a 7K Dexter axle on my dump trailer. After reading the information on the axle from “The Trailer Parts Outlet “ I decided to order the 7000 lb axle and am satisfied with the product as well as the customer service. The shipment was above and beyond, faster than expected. A representative called the day it shipped to let me know it was being shipped and to see if I might need anything else before sending it. I purchased a Beam Only and everything from my old bent Dexter axle fit perfectly. Thanks to “The Trailer Parts Outlet” I have my dump trailer back in working condition. I have already recommended them to a friend in need of a torsion axle.
James W.
Thank you for the Review!!!
This axle beam came in a timely manner and it was a perfect fit.
Learn about our products, weekly sales, discount codes and so much more.