This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)
  

This hub is compatible with - 3.5k TK Trailer Axle - 3500 lb Idler 5 lug

Idler Hub Only Specs: 

• 1 - Hub Only - 5x4.5 or 5x5 Bolt Pattern
• 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
• 1 - L68111 Inner Race 1.98" OD (Pre-Pressed In Hub) 
• Uses L68149 (1" ID) or  L44649 (1.063" ID) bearings (sold separately)

Idler Hub Assembly Specs:

• 1 - Hub - 5x4.5 or 5x5 Bolt Pattern
• 1 - 3,500 lb Trailer Axle Bearing Kit
  • 1 - L68111 Inner Race 2.362" OD (Pre-Pressed In Hub)
  • 1 - L44610 Outer Race 1.98" OD (Pre-Pressed In Hub) 
  • 1 - L44649 Outer Bearing 1.063" ID
  • 1 - L68149 Inner Bearing 1.378" ID
  • 1 - 10-19 3500 lb Grease Seal 1.719" ID 2.565" OD
  • 1 - 3,500 lb Grease Cap with Plug
    
  • 1 - Cotter Pin
  • 1 - Spindle Nut Retainer
    
• 1 - Grease Tub (1 lb)
• 5 - Cone Wheel Lug Nuts 

This 3.5K trailer axle hub features a 5-lug configuration, and it comes with the inner and outer races already pressed in to the hub. We can provide the bearings, grease seal, and other parts that you need to attach the hub to your trailer, and you can feel confident that everything will fit properly and stand up to daily wear and tear. At The Trailer Parts Outlet, we take great pride in our service and selection, and we're here to help you however we can. When you buy from us, you can count on things arriving quickly and in good condition. Order your new 3.5K trailer axle hub today!

Features: 

• Races are pre-pressed into the hub for your convenience
• This hub is designed for use with a #84 spindle
• Each hub has a capacity of 1,750lbs
• The bearings, grease seal, grease cap, wheel nuts, and spindle retainer sold separately (kit upgrade available above)