4 - 6" Oval 6 LED STT Grommet Mount Red Lens With Pigtail
2 - 6" Oval 6 LED Turn Dual Intensity Grommet Mount Amber Lens With Pigtail
2 - 2" Round Sealed LED Marker/Clearance Lights - Amber
2 - 2" Round Sealed LED Marker/Clearance Lights - Red
1 - LED Sealed ID Light Bar Red Low Profile ID Bar Red Lens
1 - License Plate Light
1 - 7 Way Plug
30' (feet) - 6 Way Cable - 14 Gauge
1 - Breakaway Kit w/ switch
Disclaimer: This wiring kit requires manual installation and is not a plug-and-play kit. Some components, such as the lights, may require cutting and splicing wires to ensure proper connections.
Features:
Traditional style fits for gooseneck trailer applications
IP68 Rated - Dust and water proof with hermetic seal
Durable impact resistant lens
Meets all FMVSS 108 requirements for narrow and wide vehicles
Reliable performance over 100,000 hours
Fits standard mounting as a direct replacement
Oval Stop, Turn, Tail Lights:
Smooth surface, great looking Stop/Tail/Turn Light
Durable impact resistant lens
Fit all industry standard 6" oval applications
Comes grommeted
Can be mounted horizontal, vertical, or at any angle
WIRE COLORS: White Ground, Red High/Turn, Black Low/Dim
Side marker Lights:
Standard non-polarized connector
Energy efficient: Draws only 0.06A at 12VDC
Wire Colors: Bidirectional positive and ground
Light Bar:
Reliable performance over 100,000 hours
Can be mounted horizontal, vertical, or at any angle
Wire colors: White Ground, Black Positive
Breakaway Kit
Built-in battery charger
Weather-resistant battery box
Sealed 12-volt rechargeable 5-amp-hour battery
Charges at 1/2 volt below voltage supplied by towing vehicle
Break-Away switch
LED tester - shows if battery is good, bad or charging
Mounting screws
7 Way Plug Includes:
Male trailer end
7 Way RV blade type
12 volts, 30 amps
6 Way Cable - 14 Gauge Includes:
Black jacketed six strand cable
Six 14 gauge wires
Yellow, brown, red, black, blue, green
What's Included:
4 - 6" Oval 6 LED STT Grommet Mount Red Lens With Pigtail
2 - 6" Oval 6 LED Turn Dual Intensity Grommet Mount Amber Lens With Pigtail
2 - 2" Round Sealed LED Marker/Clearance Lights - Amber
2 - 2" Round Sealed LED Marker/Clearance Lights - Red
1 - LED Sealed ID Light Bar Red Low Profile ID Bar Red Lens
1 - License Plate Light
1 - 7 Way Plug
30' (feet) - 6 Way Cable - 14 Gauge
1 - Breakaway Kit w/ switch
Disclaimer: This wiring kit requires manual installation and is not a plug-and-play kit. Some components, such as the lights, may require cutting and splicing wires to ensure proper connections.
Features:
Traditional style fits for gooseneck trailer applications
IP68 Rated - Dust and water proof with hermetic seal
Durable impact resistant lens
Meets all FMVSS 108 requirements for narrow and wide vehicles
Reliable performance over 100,000 hours
Fits standard mounting as a direct replacement
Oval Stop, Turn, Tail Lights:
Smooth surface, great looking Stop/Tail/Turn Light
Durable impact resistant lens
Fit all industry standard 6" oval applications
Comes grommeted
Can be mounted horizontal, vertical, or at any angle
WIRE COLORS: White Ground, Red High/Turn, Black Low/Dim
Side marker Lights:
Standard non-polarized connector
Energy efficient: Draws only 0.06A at 12VDC
Wire Colors: Bidirectional positive and ground
Light Bar:
Reliable performance over 100,000 hours
Can be mounted horizontal, vertical, or at any angle
Wire colors: White Ground, Black Positive
Breakaway Kit
Built-in battery charger
Weather-resistant battery box
Sealed 12-volt rechargeable 5-amp-hour battery
Charges at 1/2 volt below voltage supplied by towing vehicle
Break-Away switch
LED tester - shows if battery is good, bad or charging
Mounting screws
7 Way Plug Includes:
Male trailer end
7 Way RV blade type
12 volts, 30 amps
6 Way Cable - 14 Gauge Includes:
Black jacketed six strand cable
Six 14 gauge wires
Yellow, brown, red, black, blue, green
What's Included:
4 - 6" Oval 6 LED STT Grommet Mount Red Lens With Pigtail
2 - 6" Oval 6 LED Turn Dual Intensity Grommet Mount Amber Lens With Pigtail
2 - 2" Round Sealed LED Marker/Clearance Lights - Amber
2 - 2" Round Sealed LED Marker/Clearance Lights - Red
1 - LED Sealed ID Light Bar Red Low Profile ID Bar Red Lens
1 - License Plate Light
1 - 7 Way Plug
30' (feet) - 6 Way Cable - 14 Gauge
1 - Breakaway Kit w/ switch
Disclaimer: This wiring kit requires manual installation and is not a plug-and-play kit. Some components, such as the lights, may require cutting and splicing wires to ensure proper connections.
Features:
Traditional style fits for gooseneck trailer applications
Great to hear the Gooseneck Trailer Oval LED Light Kit was perfect for you, Charles! We're thrilled you're completely satisfied with your purchase. Thank you for your business and your 5 star review!
Anna Nicholas (936) 935-2186 The Trailer Parts Outlet
Loading...
Loading...
SIGN UP FOR OUR NEWSLETTER!
Learn about our products, weekly sales, discount codes and so much more.
Choosing a selection results in a full page refresh.