3.5K Idler Trailer Axle - 61" Hubface / 46" Spring Center - 5x5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 61" hubface / 46" spring center, 5x5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 61" Hubface / 46" Spring Center - 5x5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - 73" Hubface / 58" Spring Center - 5x4.5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 73" hubface / 58" spring center, 5x4.5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 73" Hubface / 58" Spring Center - 5x4.5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - 73" Hubface / 58" Spring Center - 5x5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 73" hubface / 58" spring center, 5x5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 73" Hubface / 58" Spring Center - 5x5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - 85" Hubface / 70" Spring Center - 5x4.5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 85" hubface / 70" spring center, 5x4.5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 85" Hubface / 70" Spring Center - 5x4.5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - 85" Hubface / 70" Spring Center - 5x5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 85" hubface / 70" spring center, 5x5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 85" Hubface / 70" Spring Center - 5x5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - 89" Hubface / 74" Spring Center - 5x4.5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 89" hubface / 74" spring center, 5x4.5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 89" Hubface / 74" Spring Center - 5x4.5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - 89" Hubface / 74" Spring Center - 5x5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 89" hubface / 74" spring center, 5x5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 89" Hubface / 74" Spring Center - 5x5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - 95" Hubface / 80" Spring Center - 5x4.5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 95" hubface / 80" spring center, 5x4.5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 95" Hubface / 80" Spring Center - 5x4.5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - 95" Hubface / 80" Spring Center - 5x5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: 95" hubface / 80" spring center, 5x5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 95" Hubface / 80" Spring Center - 5x5

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - Custom Spring Center - 5x4.5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: custom spring center, 5x4.5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - Custom Spring Center - 5x4.5

Custom Order Notes: Custom axles carry a +3 day build time and are built to the measurements you enter at checkout, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung or Overslung, selected at checkout
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - Custom Spring Center - 5x5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: custom spring center, 5x5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - Custom Spring Center - 5x5

Custom Order Notes: Custom axles carry a +3 day build time and are built to the measurements you enter at checkout, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung or Overslung, selected at checkout
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - Custom Measurements - 5x4.5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: custom measurements, 5x4.5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - Custom Measurements - 5x4.5

Custom Order Notes: Custom axles carry a +2 week build time and are built to the measurements you enter at checkout, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung or Overslung, selected at checkout
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Idler Trailer Axle - Custom Measurements - 5x5

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

This fully assembled 3,500 lb idler trailer axle arrives ready to install: custom measurements, 5x5 bolt pattern, no brakes. Built with a high strength straight steel axle tube for even tire wear, packed with high temperature grease.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - Custom Measurements - 5x5

Custom Order Notes: Custom axles carry a +2 week build time and are built to the measurements you enter at checkout, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung or Overslung, selected at checkout
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Fully assembled - Hubs and bearings installed, greased, and adjusted
• Underslung design - Lower ride height, best used with double eye springs
• EZ Lube - Grease the axle without pulling the hub

Why This Axle?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 61/46 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 61/46 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 73/58 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 73/58 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 85/70 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 85/70 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 89/74 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 89/74 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 95/80 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 95/80 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – Custom Spring Center – 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

Custom Order Notes: Custom axles carry a +3 day build time and are built to the measurements you enter above, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – Custom Spring Center – 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

Custom Order Notes: Custom axles carry a +3 day build time and are built to the measurements you enter above, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – Custom – 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

Custom Order Notes: Custom axles carry a +2 week build time and are built to the measurements you enter above, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Straight Idler Trailer Axle Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb idler trailer axle kit. Built for durability, performance, and easy installation, this 3.5K 5-lug trailer axle kit comes complete with leaf springs and U-bolts and is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – Custom – 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle

Custom Order Notes: Custom axles carry a +2 week build time and are built to the measurements you enter above, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Key Benefits:

• Fully assembled & packed with high-temp axle grease — ready for fast installation
• High-strength steel construction — Ensures durability and a smoother highway towing experience
• EZ-Lube design — grease the axle via zerk fitting without removing the hub

Ideal For:

• RV builds or replacements
• Utility trailer conversions
• Boat trailer upgrades
• Cargo & equipment trailers

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K Straight Idler Trailer Axle Kit today and get back on the road with confidence!

3.5K Light Duty Single Axle TK Trailer Kit - 61" Hubface / 46" Spring Center - 5x4.5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 61" Hubface / 46" Spring Center - 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 D15 6 Ply Bias TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 61" Hubface / 46" Spring Center - 5x5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 61" Hubface / 46" Spring Center - 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 R15 Radial TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 73" Hubface / 58" Spring Center - 5x4.5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 73" Hubface / 58" Spring Center - 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 D15 6 Ply Bias TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 73" Hubface / 58" Spring Center - 5x5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 73" Hubface / 58" Spring Center - 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 R15 Radial TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 85" Hubface / 70" Spring Center - 5x4.5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 85" Hubface / 70" Spring Center - 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 D15 6 Ply Bias TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 85" Hubface / 70" Spring Center - 5x5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 85" Hubface / 70" Spring Center - 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 R15 Radial TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 89" Hubface / 74" Spring Center - 5x4.5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 89" Hubface / 74" Spring Center - 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 D15 6 Ply Bias TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 89" Hubface / 74" Spring Center - 5x5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 89" Hubface / 74" Spring Center - 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 R15 Radial TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 95" Hubface / 80" Spring Center - 5x4.5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 95" Hubface / 80" Spring Center - 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 D15 6 Ply Bias TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - 95" Hubface / 80" Spring Center - 5x5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - 95" Hubface / 80" Spring Center - 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles
• (2) 15" 205/75 R15 Radial TWA (Tire Wheel Assemblies) - Silver/Gray Finish

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung (spring seats welded on the bottom, lower ride height)
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - Custom Spring Center - 5x4.5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - Custom Spring Center - 5x4.5
• (2) 1.75k 25.25" 4 Leaf Double Eye Springs
• (1) 3.5k U-Bolt Kit
• (1) Double Eye Hanger Kit
• (2) 15" 205/75 D15 6 Ply Bias TWA (Tire Wheel Assemblies) - Silver/Gray Finish

Custom Order Notes: Custom axles carry a +3 day build time and are built to the measurements you enter at checkout, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung or Overslung, selected at checkout
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - Custom Spring Center - 5x5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - Custom Spring Center - 5x5
• (2) 1.75k 25.25" 4 Leaf Double Eye Springs
• (1) 3.5k U-Bolt Kit
• (1) Double Eye Hanger Kit
• (2) 15" 205/75 R15 Radial TWA (Tire Wheel Assemblies) - Silver/Gray Finish

Custom Order Notes: Custom axles carry a +3 day build time and are built to the measurements you enter at checkout, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung or Overslung, selected at checkout
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - Custom Measurements - 5x4.5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - Custom Measurements - 5x4.5
• (2) 1.75k 25.25" 4 Leaf Double Eye Springs
• (1) 3.5k U-Bolt Kit
• (1) Double Eye Hanger Kit
• (2) 15" 205/75 D15 6 Ply Bias TWA (Tire Wheel Assemblies) - Silver/Gray Finish

Custom Order Notes: Custom axles carry a +2 week build time and are built to the measurements you enter at checkout, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung or Overslung, selected at checkout
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Light Duty Single Axle TK Trailer Kit - Custom Measurements - 5x5 - Idler Axle, Suspension, Tires & Wheels

Compatible with most 3.5K trailer applications. Replaces Dexter, AL-KO, Hayes, and Lippert axles.

The complete single axle setup in one package: the fully assembled 3,500 lb idler axle, matched suspension, and two tire and wheel assemblies.

What's Included:

• (1) Fully Assembled 3.5k TK Idler Axle - Custom Measurements - 5x5
• (2) 1.75k 25.25" 4 Leaf Double Eye Springs
• (1) 3.5k U-Bolt Kit
• (1) Double Eye Hanger Kit
• (2) 15" 205/75 R15 Radial TWA (Tire Wheel Assemblies) - Silver/Gray Finish

Custom Order Notes: Custom axles carry a +2 week build time and are built to the measurements you enter at checkout, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Axle Specs:

• Capacity: 3,500 lb (3.5K)
• Lug: 5 Lug
• Tube: 2 3/8" Round
• Brake: None (Idler)
• Mounting: Underslung or Overslung, selected at checkout
• Hub Design: EZ Lube (grease zerk under a removable rubber plug, no hub removal needed)
• ABS: This axle is not ABS compatible
• Replaces: Dexter, AL-KO, Hayes, Lippert

Features:

• Pre-packaged fitment - Matched components, no cross-referencing parts
• Fully assembled axles - Packed with high-temp grease, EZ Lube hubs, underslung spring seats

Why This Kit?

Whether you are building a new trailer or replacing worn running gear, this gives you matched parts sized to work together. No mismatched components, no return trips to the parts store.

Why The Trailer Parts Outlet?

Fast shipping. Accurate fitment. Real people ready to help. We specialize in trailer parts so you do not have to guess, just order and get back on the road.

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 61/46 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Bias TWA 205/75 D15 Tire Wheel Assemblies – Silver/Gray Finish - 5x4.5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 61/46 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Radial TWA 205/75 R15 Tire Wheel Assemblies – Silver/Gray Finish - 5x5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 73/58 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Bias TWA 205/75 D15 Tire Wheel Assemblies – Silver/Gray Finish - 5x4.5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 73/58 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Radial TWA 205/75 R15 Tire Wheel Assemblies – Silver/Gray Finish - 5x5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 85/70 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Bias TWA 205/75 D15 Tire Wheel Assemblies – Silver/Gray Finish - 5x4.5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 85/70 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Radial TWA 205/75 R15 Tire Wheel Assemblies – Silver/Gray Finish - 5x5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 89/74 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Bias TWA 205/75 D15 Tire Wheel Assemblies – Silver/Gray Finish - 5x4.5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 89/74 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Radial TWA 205/75 R15 Tire Wheel Assemblies – Silver/Gray Finish - 5x5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 95/80 – 5x4.5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Bias TWA 205/75 D15 Tire Wheel Assemblies – Silver/Gray Finish - 5x4.5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – 95/80 – 5x5 (Underslung)
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Radial TWA 205/75 R15 Tire Wheel Assemblies – Silver/Gray Finish - 5x5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – Custom Spring Center – 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Bias TWA 205/75 D15 Tire Wheel Assemblies – Silver/Gray Finish - 5x4.5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

Custom Order Notes: Custom axles carry a +3 day build time and are built to the measurements you enter above, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – Custom Spring Center – 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Radial TWA 205/75 R15 Tire Wheel Assemblies – Silver/Gray Finish - 5x5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

Custom Order Notes: Custom axles carry a +3 day build time and are built to the measurements you enter above, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×4.5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – Custom – 5x4.5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Bias TWA 205/75 D15 Tire Wheel Assemblies – Silver/Gray Finish - 5x4.5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

Custom Order Notes: Custom axles carry a +2 week build time and are built to the measurements you enter above, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!

3.5K Single Axle Complete Trailer Kit — 3,500 lb capacity | 5×5 bolt pattern | Ready-to-Install Kit

Upgrade your light-duty trailer with this 3,500 lb light duty single axle complete trailer kit. Built for durability, performance, and easy installation, this 3.5K 5-lug single axle complete trailer kit comes complete with leaf springs, U-bolts, hanger kit, tires & wheels, and many more components. This kit is a perfect fit for RVs, cargo trailers, utility trailers, and boat trailers. Whether you're replacing a worn-out axle or building a custom trailer, it delivers the strength and reliability you need.

What’s Included:

Axle & Suspension

• (1) 3.5K Straight Idler Trailer Axle – Custom – 5x5
• (2) 4-Leaf Double Eye Springs for 3500 lb Axles
• (1) U-Bolt Kit for 3500 lb Axle
• (1) Double Eye Hanger Kit – Fits 2K to 7K Axles

Wheels & Fenders

• (2) 15” 6-Ply Radial TWA 205/75 R15 Tire Wheel Assemblies – Silver/Gray Finish - 5x5 Bolt Pattern
• (2) 9x32 Smooth Steel Rolled Fenders – Single Axle
• (2) 9x32 Smooth Steel Fender Backs

Coupler & Jack

• (1) 7K A-Frame Cast Trailer Coupler – 2" Bulldog Style
• (1) 2K A-Frame Trailer Jack – Top Wind
• (1) Jack Footplate

Lights & Wiring

• (1) LED Trailer Light Kit with Harness
• (1) License Plate Bracket

Safety & Braking

• (2) Silver Trailer Safety Chains – 1/4" x 31" (5K Capacity)

Custom Order Notes: Custom axles carry a +2 week build time and are built to the measurements you enter above, in 1/4 inch increments. Custom orders are non-refundable, and any modifications to the order must be requested within 24 hours of purchase.

How to Measure: Hubface is measured from one hub face (where the studs come out) to the hub face on the opposite side. Spring Center is measured from the center of one spring seat to the center of the opposite spring seat.

Why Choose This Complete 3.5K Axle Kit?

• Pre-packaged for single axle trailers with a 3,500 lb capacity
• Includes axle, suspension, wheels, lighting, coupler, jack, and safety components
• Ideal for utility trailers, landscape trailers, cargo haulers, and more
• Built to last with high-quality steel and DOT-compliant parts

Why Buy from The Trailer Parts Outlet?

• Fast shipping — order today, ships tomorrow
• Bulk & wholesale options available
• Financing options
• Dedicated expert support

Have questions? Call or message us at (936) 289-3191 — we’re here to help you find the perfect axle for your trailer build or repair.
Order your 3.5K light duty single axle complete trailer kit today and get back on the road with confidence!