We get it. You love to get your hands dirty with a DIY project. Here at The Trailer Parts Outlet, we like to put together kits to make your life a little bit easier. No need to worry about sending mismatched parts back or realizing you need something you don’t have. We understand that your time is valuable, and we want to help you make the most of it.
No matter what capacity trailer you’re hauling, you can find the materials you need to build your own axle. Let’s explore some of your options.
Why Build Your Own Axle?
You can use these DIY axle build kits if you’re building your own trailer from scratch. You can also use them to replace your existing trailer axles. Trailer axles wear out every two to three years. Remember, these times are just estimates and they change depending on how much heavy use your trailer is getting, and whether or not it is stored outside. Account for whether or not the axles have been in contact with corrosive seawater or road salt too. You should keep your axles fresh and in tip top condition by replacing yours well before then. This is important for your own safety and other motorists on the road.
What Trailer Axle Kits Come With | Inside a DIY Build Your Own Trailer Axle Kit
When you want to build your own trailer axle, you get everything you need in these kits. Let’s take a look at what’s inside this 2000 lb Build Your Own Idler Trailer Axle Kit - 2k Capacity for an example.
Here’s a full list of everything included in this kit:
(1) 2k Dexter Trailer Axle - (2000 lb Beam Only)
- (1) 2000 lb Idler Trailer Axle Service Kit - 2k Capacity
- (2) 2k (2000 lb Capacity) Bearing Kit
- Inner bearing-L44649 1.063 I.D
- Outer bearing-L44649 1.063 I.D
- Double lip grease seal-10-60 1.987 O.D 1.5 I.D
- Inner and Outer Race-L44610 1.980 O.D.
- 2k Grease Cap
- 2k Grease Plug
- (2) 2k Hub
- (1) Tube of High Temp Axle Grease
- (8) Coned Wheel Nuts
- (2) Spindle Nut
- (2) Spindle Nut Retainer
- (2) DWasher
- (2) Castle Nut
We’ve handpicked these axle building parts, and we have even tested them to make sure this kit offers a top-notch axle-building experience. These are OEM-grade replacement parts. This is the most convenient way to make sure you have everything you need to get the job done.
Build Axle Kits for Any Capacity Trailer
Whether you are hauling a 2,000 lb, 3,000 lb, 3500 lb, 6,000 or 7,000 trailer, you’ll be able to find the build kit you need for your axles thanks to The Trailer Parts Outlet.
Other DIY Kits for Your TrailerWe don’t just offer DIY axle build kits. Also check out our brake replacement kits, spindle kits, and . If you have any questions about which kit is right for you, or how to use your kit, please contact us today. Our friendly representatives love to help.